64356.com
对于软管泵的内部结构，通常有挤压轮和滑靴两种设计方法。对于软管挤压，挤压轮的设计更为柔软，因为当软管被压缩时，挤压轮在软管表面滚动。滑靴的设计不仅压缩了软管，而且在软管表面产生滑动摩擦，使挤压后的管道产生很大的磨损。因此，在采用滑靴结构设计时，必须在泵壳内壁添加足够的润滑油，以帮助延长软管的使用寿命。滑靴的设计和在泵中添加润滑剂，在一定程度上增加了滑靴蠕动泵的复杂性和成本。
豫信致诚机械设备(大连市分公司)拥有完善的 路沿石成型机售前、售中、售后服务体系，我们一贯的宗旨是：“以质量求生存，以信誉求发展”，我们愿以：一切服务于客户，一切为客户着想。用好的质量、好的服务开拓创新，与客户携手共进，共图发展。欢迎选用我公司 路沿石成型机产品，来样定制，按需设计，更欢迎您来厂指导工作。为使我们的工作做的更好，请您提出宝贵的意见，客户满意是我们的宗旨，客户的要求是我们的目标。热烈欢迎广大朋友莅临指导。
众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。
It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.
多用途移动泵站的主要用途：
多用途移动泵站基于泵设计开发，大流量软管泵是市政给排水中常用的一种泵型，拥有大量的潜在用户，其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。
The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.
首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。
First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.
