发布时间:2024-09-14 08:23:06 浏览次数:2 公司名称:[眉山]豫信致诚机械设备有限公司
产品参数 | |
---|---|
产品价格 | 电议 |
发货期限 | 电议 |
供货总量 | 电议 |
运费说明 | 电议 |
规格型号 | YXRG-15 (200) |
流量 | 2~85立方/小时 |
功率 | 1.5~35kw |
压力 | 1Mpa~2Mpa |
重量 | 60~2000kg |
水平输送能力 | 100m |
垂直输送 | 3~15m |
软管泵最大吸程 | 8m |
软管尺寸 | 按规格定制 |
设备类型 | 小型软管泵 |
设备用途 | 工业软管泵、输送软管泵 |
工作原理 | 滚轴挤压式循环往复 |
参考价格 | 5000~85000 |
耐腐蚀性输送性能 | 可输送 |
食品果酱输送性能 | 可升级为不锈钢型软管泵,食品级软管 |
其他行业应用 | 根据输送物质类型,定制设计加工 |
交货周期 | 小型软管泵现货,大型定制 |
付款方式 | 预付30%,剩余货到付清 |
工业软管泵设备特性说明:部分特性说明。
(4)自吸力高。相对于其他形式的容积式泵比较,理论自吸高度可达到9.5m。一般渗滤液都在储液池中,需要高自吸力的泵将渗滤液吸上来,然后输送到过滤器或焚烧炉中。
(5)安装变频电机后,可根据实际需要处理的垃圾渗滤液的多少轻松的调节电机工作频率,可达到流量的线性变化。使得整个垃圾渗滤液回喷系统操作简单,自动化程度高。
(6)泵腔内部便于清洗。当不需要输送时,可打开进出口端的旁通管路可将软管内清洗干净,延长软管的使用寿命。
软管泵属于蠕动泵的范畴,主要是由一根特制的橡胶软管,对应泵体内转子总成上的一对压辊,当压辊沿着橡胶软管转动时,压辊与泵壳产生的挤压力将橡胶软管压扁,在软管自身弹性和侧导辊的强制下,通过恢复原状产生的真空吸入流体物料,物料在压辊的机械挤压下从管内排出,如此往复循环,从而达到连续输出物料的目的。
The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.
眉山豫信致诚机械设备有限公司技术力量雄厚、生产制造精良、售后服务佳,并具有一套切实可行的质量保证体系,拥有强大的安装调试队伍。我公司宗旨:以新的机制、新的起点、继续致力于 路沿石成型机的研究和开发,努力提高自身素质,增强市场竞争力。我公司全体员工真诚期待携手与您合作,为我国 路沿石成型机事业作出大的贡献,为我们的美好明天奋斗。
工业软管泵不锈钢齿轮泵,可输送非润滑油饮料低腐蚀性液体,配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差,一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”,则必须是下一级齿轮泵的止回阀或控制阀。移动固定后,周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.