工业软管泵吸附剂输送

软管泵用途非常广泛，市面上的诸多场合均可适用，如：污水泵井事故清空，污水泵站事故抽空，水厂的污水池、污泥池清空。市政下水道系统的污水、污泥清空抽排。工厂、罐车事故后的油品、液体物质、化学污泥等的紧急转移；事故后地表冲洗水抽吸泵。消防应急水转移；紧急供水泵站，泵内部过流部件都可配备不锈钢，数台泵车串联使用可作为临时供水泵站。军队、海军部队战备后勤泵车。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 

更换泵管操作步骤：
将连接泵进出口的管道拆开，并将冷却液放出。将进出口管夹内六角螺栓（各四个）拧下。短接管及管卡取出。将进出口前接管螺栓旋出，将前接管、压环及密封圈取出。启动电机，使电机顺时针旋转，将软管拉出。启动电机，使电机逆时针旋转。将新软管一侧涂少量润滑脂（黄油），然后将涂有润滑脂的一侧向泵壳壁，从泵壳上方插入至泵壳中，直至软管到泵壳下方出口的合适位置，停电机。将密封圈套至软管下口泵接管内，将压环装入，拧紧前接管螺栓，装入管夹，拧紧管夹螺栓。启动电机，使电机逆时针旋转，用手或橡胶板堵住软管上方口，软管全自行进入泵中，通过泵侧面窗口观察，使软管贴到泵壳内壁，停电机，按固定的方式将软管安装好。填加冷却液，软管更换即告完成。